Monthly Archives: October 2018

How To Clean Mirrors Without Streaks

Clean Mirrors Without StreaksIf we started to wash the mirror, we would like to bring the result of work to perfection, so that the mirror was perfectly clean, radiant. Why are there streaks on the mirror? First, streaks occur because the mirror is not well cleaned – there are particles of dust and fat.

The second possible reason is the traces of detergent that was used when cleaning the mirror. This results in the appearance of soap streaks.

Third, water itself may not be very clean – sometimes it contains various impurities, which are manifested in the form of streaks. Knowing the reasons, it is easy to make an algorithm of action, which will allow to wash the mirror without stains to an ideal shine.

How to wash a mirror without streaks: in order

  1. Remove the dirt

For starting with a mirror you need to remove dust and grease. It’s not enough just to spray on a mirror surface a means for cleaning glasses and rub with a cloth – in this case, streaks, most likely, do not pass. Therefore, we arm a sponge and some liquid detergent. Perfectly suitable liquid dishwashing detergent. You can also use shampoo for hair.

The sponge needs to be soaked with water, drop a little detergent on it, foam it and carefully rub the mirror (soft side of the sponge!). Under no circumstances should you use any abrasives – they can scratch the surface.

Rinse the sponge, remove the detergent from the mirror cloth. Then we take a napkin (it is desirable from microfiber) and another couple of times the mirror is cleared, each time rinse the napkin with clean water.

If there are dropped fat droplets on the mirror or other hardened dirt, you can carefully remove them from the surface with a sharp blade or knife, and then rub the area with a soft sponge.

If the mirror is very dirty, it is possible to use a dishwashing detergent. It is necessary to first apply it on a sponge and to moisten it, turning it into a paste. Having a paste of consistency, the powder will scratch the surface of the mirror less.

  1. Wash the mirror with clean water

Thoroughly removing dirt from the mirror and detergent residue, it is necessary to wipe the surface with the cleanest water. Ideally, it is worth using boiled water, soaking it with a sponge or a napkin.

  1. Bring a brilliance

Now you need to rub the mirror to shine. For this purpose it is most convenient to use a microfiber or paper napkin.

The paper allows you to perfectly clear the mirror and glass, as, unlike textiles, the paper does not leave a piece of fibers and dust collected on the wet surface.

Perfect means are paper towels – they have the optimum softness, absorb excess moisture, while having no property to decompose.

Before wiping the mirror to a gloss with a paper cloth or a microfiber napkin, it is necessary to moisten the surface with a means that contributes to the perfect radiance. In stores there is a huge selection of similar means for washing glasses and mirrors. They are sold, as a rule, in large bottles with a spray gun.

It is necessary to spray a little money on a mirror and rub it with a paper cloth or microfiber napkin. All! The mirror shines and no streaks!

If at hand there is no such means for glasses and mirrors, it is possible to prepare his home analogue. For this purpose, it is necessary to dilute ammoniacal alcohol in boiled water at a rate of 1 tablespoon ammonium per glass of water. Pour this solution into a spray gun, spray on a mirror and wipe it dry with paper or napkin. If there is alcohol or vodka, it is worth adding it to a solution of amber at a rate of 1-2 tablespoons per glass of solution.

Picture Credit: Pike Properties

Posted in Bathroom Cleaning, Cleaning Products, Cleaning Service, Cleaning Service Clearwater, Cleaning Tips, Green cleaning, Home Cleaning, House Cleaning, Tips | Tagged , , , , , | Leave a comment

How to Clean Gold Jewelry at Home

Clean Gold Jewelry at HomeProducts made of gold of the highest standard do not sell, because they are very soft and easily change their shape just under the touch of your fingers. In order to add gold to hardness, make an alloy in which copper, silver or other metals are added. Along with the appearance of rigidity, such gold acquires the propensity to aging, that is, over time it dims, a film of oxide appears on it.

Here are a few more reasons for pollution:

  • sebaceous glands of our skin, which constantly secrete sebum;
  • decorative cosmetics and creams;
  • surrounding dust, city smog.

The question is how to clean gold, so that its age is not noticeable. It turns out that cleaning can be done easily even at home, you just need to know a few tricks.

Imagine ways in a small table, and then describe them in detail, so that everyone can decide how to clean the gold at home with the most suitable means for him.

Cleaning with the help of improvised means

If you are looking for a simple and cheapest way to clean gold at home from dirt, then the use of cloth is for you. You will need a slightly fleecy soft material like fleece. They need to carefully rub the gold to achieve brilliance and purity.

This is a mechanical method, very gentle and suitable for absolutely any product. If you clean this way regularly, you will not need to use any liquids, including professional ones.

However, this method is not suitable in case of long-standing contamination. With its help you can not get rid of the dark oxide film and it is impossible to clean out the heavily polluted hard-to-reach places.

Soapy water

Let’s see how to clean gold at home using detergent and water. There are two options for such cleansing.

In the first case, soap or dishwashing gel is dissolved in warm water. In the soap liquid, gold ornaments are placed and left for a couple of hours to make the dirt soft. Take an old toothbrush and clean it every product, then rinse everything in running water and wipe.

The second method involves boiling. Soap solution is lowered gold and boiled for 2-3 minutes. Then, all products are pulled out and cleaned in exactly the same way as in the first method, using a soft brush.

Boiling in water with soda

An uncomplicated way with which you can clear gold from pollution is by boiling it in water with soda. It is necessary to pour a small container of water, put the gold there and heat the water. Then add soda (a glass of water about a tablespoon) and boil for several minutes. When you get your items out of the water, you will have to brush them, rinse them and dry them.

Some recommend rubbing gold directly with soda, adding a little vinegar, but this method can lead to surface damage. Soda leaves scratches, and the higher the sample of the product, the more likely that you will mechanically damage your expensive jewelry.

Vinegar is also not desirable to clean jewelry. High-grade gold, of course, vinegar is not terrible, but it can damage the alloy. In addition, the acid in no case can not be used if the product contains stones. Even the evaporation of acids can irreparably spoil some minerals.

Toothpaste

Any toothpaste or tooth powder contains substances with light abrasive properties. So they can clean the metal. Damage to the product will not occur, since the paste contains blowing agents that soften the action of the abrasive.

Gold is covered with paste and begins to be cleaned, just like teeth. Only the brush should be taken gently, and do not use it then for the oral cavity. The length of the process depends on how large your product is and how thoroughly you clean it.

Cleaning of gold, decorated with precious stones

Gold itself can be wiped with a weak solution of vinegar, ammonia, special cleaning agents. However, stones require special treatment. There are stones that are not afraid of the impact of water and certain chemicals, but there are those that need only an extremely careful approach.

  • Gold product, decorated with diamonds, cubic zirconium, can be cleaned with ammonia or washed in soapy water. Diamonds can even be rubbed with a brush, it does not hurt them.
  • But to turquoise, corals and tender pearls, a solution of ammonia (ammonia) can not be used, it is better to simply wipe the flannel. Ruby, opal, lapis lazuli can be gently washed in a weak solution of baby soap.
  • Many opaque stones in general are best to wipe with a special napkin or soft cloth, without applying to them chemical agents and even water.
  • You can not wet stones if they are glued to gold.
  • Clean the dirt from hard-to-reach places are helped by cotton swabs, which are moistened in a special composition, bought in a jewelry salon.

Take care of jewelry regularly and treat them with love.

Picture Credit: Jacek Dylag

Posted in Cleaning Service, Cleaning Tips, Home Cleaning, Tips | Tagged , , , , , , , | Leave a comment